Some Wireless Devices Not Connecting to WiFi Network
The new Cudy AX1800 LT18 Router uses the latest in WiFi6 Technology. Not all devices are compatible with the new technology, and will need to use legacy connections. Here's how to change the wifi settings in your Cudy router.
If you find that some clients have problems connecting to 2.4GHz WiFi 6, please update the client's wireless network card driver to the latest version. If you still have problems, please adjust the wireless mode of the router to 2.4GHz (802.11b+g+n). See the steps below.
If you find that some clients have problems connecting to 5GHz WiFi 6, please update the client's wireless network card driver to the latest version. If you still have problems, please adjust the wireless mode of the router to 5GHz (802.11a+n+ac). See the steps below.
- Login to your routers control panel located at: http://192.168.10.1
- Navigate to the General Settings tab from the top menu
- Select the Wireless option from the left side menu
- Under the Wireless 2.4G Settings area, change Mode to: 802.11b+g+n
- Under the Wireless 5G Settings area, change Mode to: 802.11a+n+ac
Related Articles
Manually Connecting GL Router to Cellular Network
Occasionally, your router may disconnect from the cellular network. When this happens, you may see an error displayed on your computer, tablet or phone saying "Connected, No Internet", or similar. You can check your routers connection to the cellular ...Connecting to Your X750
You can connect to the router via Ethernet cable or Wi-Fi. Note: This step only connects your devices to the local area network (LAN) of the router. Connect via LAN Connect your device to the LAN port of the router via Ethernet cable. Connect via ...Compatible Devices List
Introduction: Welcome to the Travel Data Compatible Devices List! Here, you’ll find a selection of devices fully supported by our service. Each device purchased from Travel Data arrives pre-configured with a SIM card, ready to activate and use right ...I am connected to WiFi but can't access the Internet
In cases where you are connected to the WiFi network, but cannot reach websites on the internet, or see a message like "No Internet", please check the following: Check for Cellular Connection Your device needs a cellular signal in order to connect ...How do I remove devices from InControl 2?
To remove devices from an InControl account Login to your InControl account Navigate to the group they are in 1) Click Edit 2) Select the device with which you want to remove 3) Click Actions and you will see this: Click Remove Select ...retained on ...