Setting your GL Routers APN

Setting your GL Routers APN

1. Connect to your device via WiFi or an Ethernet cable plugged into the LAN port on the back of the router.


2. Open a web browser of your choice and enter 192.168.8.1 in the navigation bar.



3. Enter your admin password. If you do not remember your password, you will need to factory reset the router, and set a new password. The default password is: goodlife1


4. Click on "Manual Setup"



5. Highlight and clear the existing APN and type on of the following depending on your service provider.


Travel Data Blue Plans: broadband

Travel Data Magenta Plans: fast.t-mobile.com

Travel Data Red Plan: vzwinternet



6. Click "Apply" and wait 3-5 minutes for your router to reconnect.


    • Related Articles

    • Setting the APN for UOTEK Equipment

      While connected to your routers wifi network, login to the admin control panel. The default address is: 192.168.100.1, and the default password is: admin From the home screen, select the APN option from the menu under 5G NetWork Select The Add APN ...
    • Reset and Set APN for LT18 Router

      Reset Your LT18 Router With the router powered on, press and hold the RESET button for 6 seconds before release. Wait while the router resets. Set the APN If the router does not automatically connect to the correct APN, you can set the proper one ...
    • Set Up Your GL-X3000 SpitzAX 5GNR WiFi 6 Router

      These steps are for Version 4.5 or Greater Follow these steps to allow Travel Data Customer Support remote access to configure your router for you. Connect to your X3000’s Wi-Fi or wired network. You may be presented with error notifications on your ...
    • NRadio First Time Setup

      Setting up your NRadio router for the first time is quick and easy! While it will automatically set the correct options, you may need to adjust some items yourself. This guide will help you with the most common items. Step 1: Access the Router’s ...
    • Activation: Step 2

      Using your computer or mobile device, connect to your mifi or router's wireless network. If using a phone, you MUST first switch airplane mode on, then turn your wifi back on, and connect to the mifi, or routers wireless network. Please ignore all ...