Powering the X750

Powering the X750

X750 Powering
Plug the power cable into the power port of the router. Make sure you are using a standard 12V/1.5A power adapter. Otherwise it may cause malfunction.
Note: Hot plug for SIM card and TF card is not supported. If you want to use, please insert before powering on the router.‚Äč
    • Related Articles

    • LT18 - AX1800 Product Specifications (Technical)

      Attached to this article you can locate and download the product spec sheet for this router. 
    • Connecting to Your X750

      You can connect to the router via Ethernet cable or Wi-Fi. Note: This step only connects your devices to the local area network (LAN) of the router.  Connect via LAN Connect your device to the LAN port of the router via Ethernet cable. Connect via ...
    • Upgrading X50 Firmware

      On the left side of web Admin Panel -> UPGRADE Click UPGRADE to check any available update and upgrade the firmware. Online Upgrade¶ You can find the current firmware version here. If your router is connected to the Internet, it will check for the ...
    • Factory Reset GL Routers

      With your device powered on, locate the recessed factory reset button then press and hold for 10 seconds until the lights begin to flash in sequence. The device will power off, and back on again - wait until the power light, and the two wifi ...
    • MikroTik Self Care Overview

      Your New MikroTik WiFi Experience If you've received a confirmation email from our Activations team that your router is ready to use, please see the below information on how to access your new router, and set up your new network. Please also check ...