Installing the Sim Card

Installing the Sim Card

 Open the bottom compartment. Slide the metal clip over the SIM card slot to the right to unlock it. Tilt it up to the right and lay in your MicroSIM card. (Be careful not to pop out the NanoSIM if your card is perforated.) Note the orientation of the notch to the lower left.

GL-X750 02

2. Close the bracket and slide it gently to the left to lock it in place. You should feel a slight click when the metal bracket is locked in place:

GL-X750 03

    • Related Articles

    • Sim Card Sizing

      For your convenience, sim cards are triple die cut, to allow for all devices to use a card that properly fits their sim card holder. You'll notice in the image below that the Nano fits into the Micro, and the Micro fits into the Standard - The ...
    • Sim Card Not Registered

      Sim Card Not Registered is indicative of a no cellular signal message, and not a message indicating we have not activated your sim card. Rest assured, your sim card is fully active, and service will begin working as soon as you're in a stronger ...
    • Check the Sim Card Holder

      Sometimes the sim card can become misaligned or loose from travel or movement. Check to ensure your sim card is firmly, and properly installed in the device.  4G Smart Router:  First, power off your 4G Smart Router by removing the power cord. The sim ...
    • 4G Smart MiFi - Sim Card Not Detected

      4G Smart MiFi - Sim Card Not Detected: First, power off your 4G Smart MiFi by removing the power cord, and pressing and holding the power button until all the LED indicators are off. The sim card is located on the side of the device, below an access ...
    • How can I manually select the cellular network with the Remote Sim-BestCarrier service?

      Customers with the Travel Data BestCarrier service featuring Peplink Remote Sim technology can manually request a carrier lock/unlock using this online form or by logging into their account dashboard and selecting the Remote Sim Manual Selection ...