Factory Reset GL Routers

Factory Reset GL Routers

  1. With your device powered on, locate the recessed factory reset button then press and hold for 10 seconds until the lights begin to flash in sequence. 
  2. The device will power off, and back on again - wait until the power light, and the two wifi indicators are back on before proceeding to the next steps. 
  3. Search for the SSID of the router in your device and input the default password: goodlife. Note: The SSID was printed on the bottom label of the router with the following formats:
    1. GL--XXX-5G
    2. GL--XXX
  4. Open a web browser (we recommend Chrome, firefox) and visit You will be directed to the initial setup of the web Admin Panel.
  5. You need to choose the display language of the Admin Panel. Currently, our routers support English, 简体中文, 繁體中文, Deutsch, Français, Español, Italiano and 日本語.
  6. There is no default password for the Admin Panel. You have to set your own password, which must be at least 5 characters long. Then, click Submit to proceed.
  7. After the initial setup, you will enter the web Admin Panel of the router. You are now ready to configure the router to get connected to the cellular network. 
  8. Complete Step 2 of the Activation Guide: https://l.traveldata.page/step2 which will reconnect your router to the cellular network. 

    • Related Articles

    • Compatible Devices List

      Devices We Recommend: GL-Technologies (Manufacturer) You may click on each device name to be taken to the exact product which is available on Amazon, typically with same, or next day delivery, so you can be up and running quickly! Travel Data can ...
    • My Router is Roaming in a carrier covered area

      About Roaming If your router has been used in a area with little to no cellular coverage, it may have entered roaming mode, and connected to the strongest partner coverage. This is normal, and by design so that you have at least some internet ...
    • Connecting to Your X750

      You can connect to the router via Ethernet cable or Wi-Fi. Note: This step only connects your devices to the local area network (LAN) of the router.  Connect via LAN Connect your device to the LAN port of the router via Ethernet cable. Connect via ...
    • Upgrading X50 Firmware

      On the left side of web Admin Panel -> UPGRADE Click UPGRADE to check any available update and upgrade the firmware. Online Upgrade¶ You can find the current firmware version here. If your router is connected to the Internet, it will check for the ...
    • How to Check if a Peplink Cellular Router Supports RemoteSIM

      1. Login to your routers control panel then 2. Go to Network (Top tab), then WAN (Left-side tab), and click Details on any cellular WAN. This will open the WAN Connection Settings page. 3. Scroll down to Cellular settings. If you can see the Remote ...