Activation: Step 1

Activation: Step 1

Submit Device & Sim Card Information
Please visit: https://traveldata.page/account/activate/ to submit your information. Below is a list of the information we need, as well as where to locate the information. 
Device Information you will need handy: 
Device ID (May also be labeled as DDNS on some devices)
MAC Address (6 groups of 2 characters, separated by colons)
Serial Number (Typically alphanumeric, 14-20 characters in length)
Please also have your Sim Card Information: 
19 Digit Sim Card Number

    • Related Articles

    • Activation: Step 3

      Remote Activation Settings In order for our support staff to complete your device configuration, please follow these steps. Please know, we cannot provide specific instructions, as your specific device configuration may be different. *See below if ...

    • LT18 Setup Step 1

      You should now have your sim card, and router. Please have them available as we'll now need some information from each.  From your sim card, please locate the 19 digit sim card number From your router, please locate your MAC Address (MAC) on the ...

    • LT18 Setup Step 2

      Now that your sim card is active, please follow this guide to continue the LT18 Setup. Standard LT18 Setup Steps In order for your equipment to be registered, you'll need to take a few simple steps to set up your router. First, connect to your ...

    • Activation: Step 2

      Using your computer or mobile device, connect to your mifi or router's wireless network. If using a phone, you MUST first switch airplane mode on, then turn your wifi back on, and connect to the mifi, or routers wireless network. Please ignore all ...

    • Activation Setup for UOTEK Equipment

      Travel Data provides complimentary remote setup and configuration of UOTEK routers that have or have not been purchased from our store directly via ZeroTier. So we may remotely complete the setup, please keep your routers admin password set to the ...